Setting the Mailbox Lock Combination

Setting Mailbox Locks Combination | Using Mail Box Lock |
 

Wood Application

Step 1.
The Combi-Cam replaces a standard keyed 3/4 diameter cylinder. For new applications, drill a 3/4" hole.
Insert the cylinder body through the front.
Note: Be sure the set pin hole is at the bottom (red arrow) .

Mailbox Lock

Back View of installation and cylinder.

Mailbox Locks

Step 2.
Place the pronged washer for wood applications.
Tighten the 3/4" cylinder nut securely.
The pronged washer will grip the wood.
In addition, you have the option of installing small screws in the holes provided in the pronged washer.

Mail Box Locks

Step 3.
Insert dial face module through the front of the cylinder.
NOTE: Make sure the black rubber ring goes around the shaft as is inserted through the hole.

Mail Box Lock

Step 4.
The Combi-Cam replaces a standard keyed 3/4 diameter cylinder. For new applications, drill a 3/4" hole.
Insert the cylinder body through the front.
Note: Be sure the set pin hole is at the bottom (red arrow)

Mail Box Lock

NOTE: Also make sure the reset button on the dial face is at the bottom (red arrow).

Mailbox Locks

Mail Box Locks

Step 5. Stop-Cam Placement
Position 1. For the cam to rotate to the right as you face the front of the lock.

Position 2. For the cam to rotate to the left as you face the front of the lock.
1.     2.

Step 6.
Scramble the dials to lock the Combi-Cam.

Mail Box Lock

Metal Application

Lock for Mailbox Wood Installation instructions with the exception of the following steps.

Step 1. Installation will either be replacing or the metal will be punched.
Please note the punch template to the left (comes with product instructions).

Step 2. Wood Prong Washer not required.

Setting Mailbox Locks Combination | Using Mail Box Lock || Installing the Combi-Cam